Paper Pulp Machine Refiner Disc Plates for Paper Making Machine Rotor Stator Plate

• Warranty: 1 Year
• Product Type: Waste Paper Pulp
• Usage: Packing Paper Machine
• Nominal Volume(m³): Customized
• Impeller Diameter (mm): Customized
• Rotating Speed of Impeller (r /min): Customized
• Model NO.: LZCR
• Certification: CE, ISO, CCC
• Condition: New
• After-sales Service: Online and at Site Support
• Rotor Dia: 450~750
• Capacity: 20~400 Ton/Day
• Consistency: 3~5%
• Power: 110~900 Kw
• Transport Package: Standard Seaworthy Package
• Specification: Customized
• Trademark: LEIZHAN
• Origin: China
• HS Code: 84399100
• Production Capacity: 50000sets/Year

Product Description

Product Description

Claflin refiner is mainly used for beating long fiber pulp such as cotton, hemp, and wood. The fiber-to-fiber bonding strength and evenness are improved. It is good equipment to produce fine paper and high-strength paper. The equipment is furnished with an automatic control system and can be beat with constant power or constant energy consumption. The beating effect is stable.
Advantage
1. The worm wheel and worm advance and retreat the knife, and the gap in the grinding zone is stable.
2. The ring gear has a large taper, a long grinding area, sufficient slurry treatment, and strong fiber-cutting ability.
3. The rotor and stator have various tooth shapes, and the raw materials apply to a wide range.

Detailed Photos

Product Parameters

Structure and Principle
This machine is a horizontal single-direction slurry feeding, and the slurry is discharged radially upward. It is mainly composed of a base, a motor, a casing, a rotor, a stator, a knife feed mechanism, a deceleration mechanism, and a knife retract mechanism. The machine adopts an integral base, which has good rigidity and stable operation
The mechanism adopts two methods: the electric feed mechanism and the manual feed mechanism.

1. Pull out the tooth clutch on the opposite side of the hand wheel, disengage the electric feed mechanism, turn the hand wheel by hand, and move the thread sleeve axially through the worm gear mechanism, to realize the gap adjustment and feed pressure.
2. Insert the tooth clutch, the electric tool advance and retract mechanism works, and the friction clutch gearbox drives the thread sleeve to move axially to realize the tool advance and retract.
3. By adjusting the spring pressure of the friction clutch and changing the transmission power of the friction plate, the equipment always works under the rated current, and the beating quality is stable.

Model	ZM-450	ZM-460	ZM-600	ZM-750
Big end of rotor dia (mm)	450	460	600	750
Consistency: (%)	3-5
Capacity (T/D)	20-60	30-150	50-250	80-400
Motor Power (kW)	110-132	160-315	355-500	450-900

Company Profile